Guy showed up today and did the wight thing. He brought over another trans that looked very corroded but after checking the input shaft play I...
If sticking with ford...and v6...I would do the 4.0L OHC from the 05+ mustangs. I had a 2 door explorer, lowered with 285's all the way around...
Its 2013 where are the louvers!
Never showed. Phone went straight to voicemail. He will come by eventually. I am so P-ed off that I wasted two nights installing that junk...
I found a local shop that says they can order me one for 1400 and get it in a week. They do tons of mustang work and are a ford racing dealer....
The guy is coming over today he still swears that "it came from a v8 car I pulled it myself and we drove it and it worked great" >:{...
I have the cnc master and slave. Cannot quite remember the bore. I get about 1.25" of throw at the fork. I can start it in drive with the...
Thanks for the tips everyone. The tag was very very hard to read so I did not think it was even the tag with the id number on it. The input...
Update: Got a crossmember from frank (worked great) Reused my c4 rubber mount cut a hole for the shifter put the speedo drive from the...
wow that is fast. You must have a pretty stout motor to pull a 12 with a open rear!
I actually flopped on the TKO when I took some measurments and decided it was not worth messing with the tunnel. My motor is probably nowhere...
Love it. Looks quite aggressive. The center bump sets it off from being a "factory" acessory. You have done an amazing job, when I get down...
Bend it a bit?
I think this one would come setup mostly. So looks like franks AOD crossmember and the rosehill performance slave parts and my same ole...
Actually one question still remains, is the tunnel on the 69.5-70 mav's smaller than the 71+?
Does the 70 mavericks have a smaller tunnel? Looking at your pics and at my floor mine seems smaller?
I searched about 10 times reading random threads and that one did not turn up. WOW. NVM nothing to see here :)
So. What needs to be done? Is there a crossmember available? I have the cnc pedal setup/master ready to rock. I plan on buying a 3550...
The stage 1 with 1.7RR's has pretty damn good lift right? It pulls hard all the way past 6500rpm... I just have problems with the gears now the...
I would say no. My long tubes actually had to be put in place from underneath with the motor loose in the engine bay. Took us like 20 hours to...
Separate names with a comma.
