The trans tail shaft I have is marked DOZR-A and the case is marked C8AR-D. The tag is marked RUG-AT1 followed by 010411. Does anyone know if the...
If that turns out to be the case........ I will need to find the plate or ring that screws to the 2 dimples on the floor that were standard on...
I'll get you the tag i.d. when I get home. I was hoping that someone has had a 3 speed floor shift car and switched to a small block 4 speed...
which toploader I bought the toploader from a guy who had it in a 1965 Mustang. It is a 1970 Mustang wide ratio with the shifter plate on the...
I bought a toploader 4 speed with a Hurst shifter for my '71 column shift automatic car. I found the 2 dimples on the trans hump or tunnel. Where...
Please reply I want to cut the hump to install a Hurst 4 speed shifter. Should I be looking to mount it in the same spot that the automatic...
manual 4 speed topload template? I would like to know if one of the members has a template for the floor for the above mentioned with a Hurst...
I was taught that the first number of multi visc. oil say for 20w50 means that at room temperature (70 degrees) the oil will flow as a 20 weight...
oil pressure The sending unit for the idiot light is pre set at I believe 35 psi. If you did not have a red light when you used say 10w40 and you...
u.p.s. truck on acid :rofl::rofl: I knew a guy in Michigan that had a stroked 300, to 327 cubes. He had 6 yes 6 carbs on it, side draft webbers...
Thanks, and I will. Dave.
z-bar I sure could use one of those. Do I have to get one from autokrafters?
Thank you for your reply. Dave.
Hello, I am working on a 71 Maverick and accumulating parts to make this previous automatic car into a stick shifter. I have a z-bar from a 65...
I just want to give you all a big high five for allowing me to connect to others on this forum. I have sold off some of my unwanted Maverick...
Location in Chicago I am on the far northwest side of Chicago in the Jefferson Park neighborhood. I just sold my 8 inch 4 lug rear to a guy in...
Hey all, I am going to sell the 15,000 mile 200 six cylinder engine and c-4 since I bought a 302 and a ford toploader 4 speed. I also picked up an...
Update for your reading pleasure I am going to sell the 15,000 mile 200 six cylinder and c-4 since I bought a 302 and a ford toploader 4 speed. I...
1970 Gas Cap Install :thumbs2:Hello, I am also going to install one of these beautiful deluxe gas caps on my 1971. Does the stud go through one...
I have a 71 year old father living with me whose name is James Franz. Do you know him?
Separate names with a comma.
