yes, but i usually prefer a carb port that is below the throttle blades for more consistent signal.
if you only use dry ice, you shouldnt need a draincock.
you might want to keep to the simple stuff at first. insulate as much of the fuel lines as possible, especially in the eng compartment. also a...
yes it helps. anything that cools the incoming fuel or air adds hp. it also can make car more predictable by providing a less variable fuel...
keep in mind that the higher pressure cap will stress your cooling system more and may acquire a leak sooner.
i didnt throw it out there, i suggested he do a search for all the facts instead of wasting lots of space here. detroit lockers are also very...
go to the search at the top right of the page. type mini-spool. i did it and got about 30 threads to look at. essentially, since u are...
lets not start the mini-spool argument again. there are opinions both ways with key word being opinions. he can search several different threads...
shop around. i got my 4.10 gears on ebay for$85, mini spool for $45, installation kit for $55, & a guy i know installed them all for $75.
at 104 mph you should be in the high 12 to very low 13s area. 14.1 usually is in the 94-96 mph area. big variation.
as long as the 302 isnt too strong & the c4 is in decent shape, it'll be ok. if adding a lot of hp, you might want to rebuild the c4 with 5...
generally, 040 should be max.
there's a website called, i think, toohighpsi.com. this guy has done mustangs & tbirds very lo buck. he's modernized the site & its not as good...
i tried the et predictor. not even close.
if ethanol bothers rubber like methanol does, then fuel pump & certain lines must be addressed, as must aluminum parts.
mine are under back seat in front of axle.
i have the summit ones. not quite as deep as flowmasters, but i like it.
a taller tire reduces the rear gear ratio. an example: (not mathematically accurate) you have a car running a 4.56 gear with a 9 x 28 in slick....
early mavs are much lighter. they added around 100 lbs each year, it seems. i was surprised at the weight, too. by the time '75 came around they...
the H pipe would soften the "rap" a bit, but most of the sound depends on the mufflers you get. i used 2 1/4 with an X pipe i made using, of all...
Separate names with a comma.
