the tpms has been dead for over a year now. it was something for the silver state classic. when i do the sscc again ill get a new system. till...
[IMG] i had a blast at the scca autocross this weekend. saturday was a practice day and sunday was a competition day. so the changes i made from...
need to know what engine, transmission, tire height, and intended uses. with out that info i would generally recommend going to 3.25s assuming...
im not sure why the pics are not showing up. they are pics hosted on this site. when i look at the thread they were origanlly in they then appear...
this show has plenty of non show cars in it. ive seen some cars that look like they drove out of the salvage yard. i personally find looking at...
Hey Kevin, go chat with these guys http://www.autoairmarineelectric.net/ they should at the least be able to get you the pulley your looking for....
i had to notch mine to clear the lower control arm mounts. here some pics of it. [IMG] [IMG]
sorry didnt see the request for a pic till now. no i didnt have a bench seat. just pics of it with buckets.
several different sources led me to it. first maier racing uses and sells pan hard bars for leaf spring mustangs. they seem to have done the most...
today i changed the manual 20 to 1 ratio steering box to the power steering 15 to 1 box. nothing worth taking pics of so nothing to see. i did...
it was an attempt at emission reductions. by retarding the timing the cylinder pressures drop and nox emissions drop. over all it didnt work very...
i ended up using 4" back spaced wheels with 1/4" spacers which would end up with 3.75" total back space. i still needed to roll and push out the...
that is the one i was referencing. i really doubt the summit one is made by steeda. i belive its an overseas clone of the steeda design. i like...
i like pro 5.0 for drag racing and the steeda tri ax for road racing and street. the pro 5.0 seems biased to 1-4 and has a bit of a reach for 5th....
rear steer is usually the u bolts holding the diff to the leaf springs being loose. did you loosen them while doing shocks? did you not retighten...
ah ok. good to know.
a significant part of using these is the shelby drop. to move them to the stock location is going backwards. have you seen any results of the...
im pretty sure the bellhousing dictates the size of flywheel needed. thats because the starter will be located by the bellhousing. if your motor...
i agree with all said and recommended above but offer one other option. a swap to a stick shift. that was the best mod i ever did to my maverick....
i would recommend getting calverts adjustable rear shocks also. they will give you all the tuning in that you should need in the rear suspension....
Separate names with a comma.
