You think I will be OK without the transmission being rebuilt as long as I see no metal flakes in the transmission pan and oil???
We are guessing around 450hp it you can put it in gear and nothing happens so I'm guessing torque converter I got the truck to flip fix it up...
i know this isnt my maverick but i trust you guys. i just got a 1973 f250 2wd truck for 700 bucks i bought it just for the fact of it having a...
IIt is a bad safety switch thanks guys we by passed it booking the right wires up and we are good thanks again
Yes I even took out the safety switch and hooked it up to bypass it and still nothing
SSSSSorry had bad ground I do read 12volts on the red and blue when turning the key so this leaves to a bad safety switch right? How can I by pass...
Yes that's what I'm saying I just pulled the key switch and found the red blue wire when I turn the key on I should be reading 12volts right?
Yes the wiring looks to be correct from that wiring diagram could it be a safety switch or a bad key switch?
I jumped across the solenoid and it turns but nothing from key solenoid is grounded tried swapping the plugs on the front and still nothing
What wires do I need to cross on the key? I can't get to it from under the dash so ill need to pull it unsure how falcons are held in by on the...
It doesn't click I get power to the solenoid but not the starter we hot wired the old solenoid at the old owner house cus it didn't it start my...
Working on a new 67 falcon 200auto trans has new solenoid and volt regulator everything electrical works but will not crank what do I need to...
Ok that ill bump the timing up a little more. And I know I need to get out and drive her toget it adjusted better. Yes I do have a sprng in the...
the rear end im going to have to wait and find someone to look at it since i dont know exactly what im doing. ha yea i just have a cheap $200...
thats what i was thinking too i know the first time i went to take it down the road it didnt shift turned around and i forgot to hook up the...
oh dang 285?? theres no way i got it that tight i think my impact maxes out at 250ft/lbs and i dont have that powerful of a compressor
yea i got the kit from summit and the spool from ebay. would it be best to drive it to a shop when i find one so they can hear it our just the...
yes i could still rotate it the first turn was not hard to rotate but had a good deal or resistance ( i could still turn it by hand didnt need to...
i guess for the rear ill just have to find someone close to look at the rear end? i have aftermarket gauges and the old 302 i had in it with a...
I really hope it is just the cut of the gear and I did it all right but this howls loud could maybe over adjuating the rear brakes/ebrake and put...
Separate names with a comma.
