interesting test , scoop ..all this info and free too! now you gotta get some ngk's to test out...thanks
not a bad idea to plug the tailshaft of the trans with either a rag or a plastic tailshaft plug..
got mine from jc whitney last month. everything fit perfect , rear bushings only had 34 k on them and shackles too so I just reused them.
have the original 6cyl standard cable in my car , bought a speedo gear on ebay for 10 bucks...have to match rear end ratio...
:burnout:git in an hold on granny!! :burnout: welcome !!
could use new springs with mine..traditionally a good small ford cam favors the exhaust side a little more, on the low end it's a little...
I take it it's an e 303 cam? good cam plenty of mid range...
firing order 13726548 for 302 h.o. that is the order for you.
aim the rotor at #1 on the cap , make sure you have the correct firing order as there are two different ones.
4.11's are not bad if you have overdrive....I have a t5 I end up in 5th gear on counntry roads. The only problem with the combo is that the t5...
you have a bad left headlight. replace the headlight
who needs braces...i want a hilborn scoop and two fours!!
Dan this just occurred to me, ....to use the am knobs, i used a small metal springsteel bushing which was on the am radio shafts...make sure you...
:biglaugh:maverick tuner car.....make that tuna car...cause that thing stinks!
hey jason, my parts car has an 8 inch rear with 5 lug and 42 k original, i,ll sell it to you for 75 bucks....and i,m just next town over...such a...
running a wysco hei distributor , 60 bucks on ebay...one wire...can buy an hei cap and rotor anywhere cheap cheap...comes with the right gear, I...
yikes.......if you had bought that one, you would be missing a shirt as well as your shoes!..heck probly even hafta part with ya left lugnut...
well one of these days i , ll get me a camera...and yes the original bezel fit beautifully...there must be a special spanner wrench for that thing...
yeah dan...I installed a truck radio last week....I reused my 70 am radio knobs.....like you did...shafts were longer too...had to cut the plug...
most likely a chevy guy...and a bad one at that...a true car guy can appreciate all makes. you took the road less travelled, and for you it made...
Separate names with a comma.
