Top of tailshaft close to where it bolts to tranny. Tinny cap looking like vent.
that would be a different search,,,
Don, Is the Ihra working out ok for you?
"looked" was it really out of tube or maybe line rusted, broke and spraying fluid that way
2 blocks up from the 425hp Comet Grabber 500,,,
I`m still miffed on the wacko that thought he could build a engine with the valves in the head,,, it`ll never work,,, I gotta go,,, have to...
Good luck!
Good story! Did he say anything of the Shelby Maverick,,, I` sure he knew of them,,,
Welcome from Pittsburgh Pa!
I got gas,,, I gotta go,,, Glad you fixed it
If the guru didn't get this one right,,, well, I wouldn't be buying anutter from him
Great job!
Also, if you put any rubber hose in, has to be for oil.
I`ve seen electric pumps mounted above fuel cells close to tank. I don`t think you`ll have problems using stock hole and mount pump near bottom or...
I like ! question, are they stainless steel screws? Just wondering if screws get rusty down the road, will it be a problem getting nuts off...
#2 an 3 should be LTD and maybe F series 31 I`m thinking full size Couger later 70`s or Monarch
Double and triple check all the bolts are out,,,, count em and double check again! Oh, did I mention about checking to see if all bolts are...
Welcome from Pittsburgh Pa! lots of help here and I can help you with that unwanted money,,,
anyone looking for factory 13" 4 lug wheels?
Also, do you lube the cam? If engine is not running don`t leave ignition on. I`ve not done it except in school, the tension on points have spec`s...
Separate names with a comma.