I have read that 2 times already actually. I do not particularly like the way the pedal was done, but the floor mount might look really jimmy...
I pm'd frank. Parts list so far; Speedway hyd clutch kit floor mounted Mustang 88-93 T5 with belhousing, clutch, flywheel, driveshaft and...
WOW AOD's are INSANELY expensive...700$ for a good valve body...Is it gold plated? The T5 swap sounds more and more like what I want to do. As...
Anyone use the floor mount pedal/master setup? seems way too easy to be useful......
Wow after reading every thread on t5's maybe an aod is more my style! Sounds like a ton of work for the t5...
:cry: Well against everyone's advice I got a detroit locker and 4.11 gear put in the stock 8" rear, this replaced the open rear with 2.79's...
I thought you want to start at low timing and then get more advance the higher the rpm? Does the vacuum advance with rpm?
10-11 degrees initial timing is too low? What would you recommend to start with?
Molded abs plastic...done. They could probably be sold for 100$ and make profit.
It is a vacuum advance mallory hei. Pulls good with no detonation so far. Vacuum seems low with the trick flow and 1.7 rockers? Also I raised...
Luckily she is not my daily driver, so fuel economy is smiles per gallon over here :) I understand the carb can be too big just figured a 750...
I poo'd quite a bit in my pants when you posted that.... But LOUVERS! come on! A set of parts that nobody has managed to manufacture...
I will be going down tomorrow (if the maverick makes it lol hasnt been more than 15 minute freeway trip) to see what the shop says
I drove it around with the idle at 750 and holding 500 in drive and it did not stall once and seems like it has decent power at my timing spot and...
That sub is not particularly powerful neither is the amplifier. Having more output than necessary gives you headroom. Lowers distortion at...
306 10-1 cast pistons svo gt40x aluminum heads that have been decked edelbrock 600cfm carb Trick flow stage 1 cam 1.7 roller rockers...
Infinite baffle is not suitable for that type of subwoofer or that setup. If you build a ported box into that baffle it would sound very good...
What ever happened to this btw?
yep x2 would like to see them
I want that suspension setup omigod it looks badA
Separate names with a comma.
