8.8 posi rear end, good AOD, body parts, All I did was take the engine, console, shifter, and the front seats, the rest is there. Chad
Has anyone ever seen those window stickers that was around a few years back, that had "Calvin" leaning to one side and had the phrase " I should...
Thanks Cleaver! After looking at the photos, I have a small bellhousing C4, case filler tube, I found a 157tooth, 50oz flexplate for 50 bucks! I...
Well gentlemen, The day I have waited for has fianlly arrived. Ive been wating for my 88 t-bird to take a dive so I can have an excuse to put the...
Napa has the engine mounts, bout 25 each. Then you have to find the frame stands,,, Im using 88 t-bird cast manifolds for my swap,, Not exactly...
Been looking and measuring,, looking and measuring,,, LOL! Im putting a 88 roller engine in my 69,, I had a block and tranny laying around and no...
My car had the 200 with a C4. Bench seat. The diagram helps alot to show what the parts need to look like! Thanks! Chad
Been looking thru the hot rod magazines for a good floor shifter for my 69.5 maverick. Some are pretty econmical, kinda give ya the race car...
I got a 69.5 Maverick. ChadS
Are you sure that it does not have a vacuum leak somewhere? maybe your ignition isnt hot enough to fire the compression you gained from the...
So could it have been sold as a 70 model though??? For sure the key is mounted to the tray, bolted to the dash under the dash itself, The steering...
Thats what I was thinking on how the grille is supposed to be on the 70,,,, I have had this car for so long, that I had to think for a while, so I...
My key switch is on the dash. It also has sort of like a tray that goes all the way across the bottom of the dash that bolts into the sides of...
Yep, thats the way this one is! It threw me off due to the turn signal lens being in the grille, from other pictures, arent they supposed to be in...
I made a parts run today to NAPA to get some parts, just to find out the parts were not correct for it,,, So I searched on this site for a VIN...
Have you ever considered using the distributor from the 92 without the computer? Atleast until you get the distributor you want,,,, I have made...
Does the 351 windsor crank fit into the 302 block? Does the main bearings etc etc on the 351 crank, does the mains have to be tuned down to fit...
Just to get an idea on how the 302 fits without buyin parts just yet. I agree, it would shake it to death with how my engine runs, but, I just got...
I made a set out of angle Iron, I took the original 6 cyl frame mounts, put em on the back side of the frame sticking straight up, then the angle...
Separate names with a comma.
