more helpful than the internet has been lol
yeah that looks more like 17 inches
I measured the tail section and its 14.5 inches. It that considered a long tail configuration?
its got two studs and no bulge
thanks for your help
ok I have a spare drive shaft that I can have modified
could I swap out the tail and output shaft for a shorter ones?
i will post more pics when i get off work
thanks I would appreciate it
could some one Id this transmission for me, been at it all day but no luck, I have been told its from a 1979 f100 [ATTACH]
thanks guys! I did some more research and it seems its not the overdrive and is a regular 3 speed I came to this conclusion visually...
Thanks a lot baddad457, do you remember the part number of the kit you used? Yeah I have been told it's not exactly ideal, couldn't tell that it...
I was nosing around through a junk yard today and found a mystery transmission for 200$ attached to a 60's 289, it turns out its 3 speed from a...
I have herd two different things A) I need to use break in oil when firing up a rebuilt motor B) Just put zinc additive in the motor oil of your...
http://www.summitracing.com/parts/kyb-kg5447/overview/ would these shocks work with my rear suspension being lowered an inch, anything I have read...
DSII wth GM HEI ignition [IMG] Remote HEI ignition What u need 1. DSII distributor from a 78 fairmont or any V8 ford car (make sure its got...
The gear on the petronix is steel, Is the shaft diameter on the petronix the same as a stock ford distributor?
Ok thanks for the info. Will do a comparison when i get off work.
Havent herd back from them yet still waiting. How do you tell the difference between cast and steel gears? Did another search and found another...
so apparently the flame thrower D134600 on summits sight is being advertised with a cast iron gear when it really has a hardened steel gear, just...
Separate names with a comma.
