C-6/C-4 bellhousings
Re: Re: C-6 bellhousing -- Ken Merring	Post Reply	Top of thread	Maverick Message Board

Posted by: rickyracer 01/02/2002, 19:00:03

I wouldn't be surprised if they put one behind the FEs. I know the C-6 was designed for the FEs due to the torque issue. The C-4s that fit the 351/400Ms and 429/460s were installed behind 351Ms until they found out that the C-4 wouldn't handle the torque either, in stock factory form. If you know of a 351M C-4 bellhousing I sure would like to get my hands on it.

Post Reply | Alert

Original message Top of thread Return to the MMB

Replies to this message

Re: C-6/C-4 bellhousings --- Ken Merring ( 01/02/2002, 21:48:05 ) ( 788 bytes ) +1 C-6/C-4s --- rickyracer ( 01/03/2002, 16:54:39 ) ( 210 bytes )