werid movement
	Post Reply		Maverick Message Board

Posted by: chris 02/23/2002, 02:42:15

ok i have what i belive is to be a problome. i was under the hood today and i found that when i was to rev the engine up my bottom pully (crank) was moveing outward twards the radiator. it was only about a 1/16 to 1/4 inch movement but from what i know this shouldnt happen. the motor was just rebuilt with clevlite77 berings .10 over and trw flat top pistons .30 over using a standerd crank. the motor dosent shake and it dosnt lack any profmance. what would cause this? it only has about 800 miles on it?

Post Reply | Alert

View All   Return to the MMB

Replies to this message

Re: werid movement --- Ken Merring ( 02/23/2002, 02:49:05 ) ( 742 bytes ) +4 Re: werid movement --- chris ( 02/23/2002, 02:52:09 ) ( 848 bytes ) Harmonic Balancer?? --- Rick ( 02/23/2002, 03:03:01 ) ( 429 bytes ) Re: werid movement --- Ken Merring ( 02/23/2002, 03:18:03 ) ( 333 bytes ) Re: werid movement --- Tracy Norris ( 02/23/2002, 13:46:23 ) ( 1180 bytes ) movement --- rickyracer ( 02/23/2002, 15:33:12 ) ( 555 bytes ) +1 closer inspection --- chris ( 02/23/2002, 19:14:21 ) ( 285 bytes ) +1 Re: closer inspection --- Tracy Norris ( 02/23/2002, 19:21:40 ) ( 443 bytes )